Limited Time Only, Buy Now & Save Big!  Free shipping on orders $75+ in the continental USA!

​The Impact of Environmental Factors on Silicone Hoses

​The Impact of Environmental Factors on Silicone Hoses

1st Feb 2023

The introduction of silicone hoses into the world in the early 20th century has changed the way we think about the transportation of fluids and gasses. The use of silicone hoses in dozens of industries and hundreds of applications has allowed for increased efficiency, improved safety, and increased durability for these uses. However, the performance of silicone hoses can be affected by environmental factors, such as temperature, pressure, and chemical exposure.

Flex Technologies is a leader in the manufacturing and distribution of silicone hoses and tubing. In addition, we offer the ability to craft custom silicone hoses and tubing for your particular application. Learn more about how the best silicone hoses respond to these environmental factors below, and shop our best silicone tubing online today!


Temperature

The temperature of the environment in which silicone hoses are used is one of the most important environmental factors affecting the performance of the hoses. Silicone hoses are known for their temperature resistance, but extreme temperatures can still have an effect on their performance. For example, if the temperature is too low, the silicone may become brittle and crack, especially if exposed to cold temperatures over a long period of time.

On the other hand, if the temperature is too high, the hose may become soft and may not be able to maintain its shape. Therefore, it is important to ensure that the environment in which silicone hoses are used is maintained within the appropriate temperature range. And, when you invest in high-quality silicone hoses and tubing from Flex Technologies, they should be resistant to extreme temperature fluctuations, so be sure of the silicone tube's rating before purchasing.


Pressure

Pressure is another environmental factor that can affect the performance of silicone hoses. The pressure of the fluids or gasses that are transported through silicone hoses must be taken into consideration. If the pressure is too high, the silicone hose may be subject to excessive wear and tear or may even tear or burst. Alternatively, if the pressure is too low, the flow of the fluid or gas through the hose may be reduced, which could reduce the efficiency of the system. Therefore, it is important to ensure that the pressure is kept within the proper range for the application. Before investing in silicone hoses or tubing, be sure to check their pressure rating, too, for your particular application. Our customer service associates are more than happy to answer any questions you may have about our custom silicone tubing or hoses. Get in touch today.


Chemicals

Chemical exposure is another environmental factor that can have an immediate effect on the performance of silicone hoses. Certain chemicals, such as petroleum products, can cause the silicone to degrade over time, which can lead to cracks or leaks in the hose. Therefore, it is important to ensure that the silicone hoses you invest in are designed for your particular application. For example, Flex Technologies offers many different types of silicone hoses and tubing, including those designed specifically for automotive applications. Let us know if you have questions on which custom silicone hose is right for you.


Humidity

Humidity is also an important factor to consider when it comes to silicone hoses, which many industries forget to think about. Too much moisture can cause the rubber to swell and become soft, which can compromise its structural integrity. Too little humidity can cause the rubber to become brittle and less flexible. It is important to ensure that the environment in which the silicone hose is used is within its recommended humidity range. Some industries choose to use their hoses in climate-controlled areas in order to mitigate some of these environmental factors altogether.


Ultraviolet Light

Ultraviolet (UV) light is another environmental factor that can have a negative impact on silicone hoses. Prolonged exposure to UV light can cause the rubber to become brittle and degrade over time. This is an important consideration when you have tubing exposed to the sun in outdoor applications. To prevent this, it is important to make sure that the hose is shielded from direct sunlight or any other source of UV radiation. If this is not possible, you may have to change out your silicone tubing more often in order to ensure its functionality. Alternatively, you can speak to an associate at Flex Technologies who can advise you on the proper silicone hosing for your application, or ask about our custom silicone tubing design solutions today.


Ozone

Finally, ozone can have a significant effect on the performance and longevity of a silicone hose. Ozone is an unstable form of oxygen that is naturally present in the atmosphere, but it can also be generated artificially, such as in the presence of electric motors and generators. Exposure to ozone can cause the rubber to become brittle and crack, so it is important to make sure that the hose has limited-to-no exposure to any source of artificial ozone.


PARTNER WITH FLEX TECHNOLOGIES TODAY

Environmental factors such as temperature, pressure and chemical exposure can have an effect on the performance of silicone hoses. Therefore, it is important to ensure that the environment in which silicone hoses are used is maintained within the appropriate temperature range, the pressure is kept within the proper range for the application, UV and ozone exposure are limited, and the hoses are not exposed to any hazardous chemicals. By doing so, the performance of the silicone hoses will be maximized and the life of the hoses will be extended.

Flex Technologies has been providing the best silicone hoses and tubing for more than 20 years. Our experienced team is passionate about ensuring you have the highest quality silicone hoses and tubing for your applications. Your success is our success, and we understand how important our tubing products can be for your needs. Our team is here to help answer any questions or get you set up with a custom silicone tubing solution for your unique needs. In addition, we offer:

  • Custom tooling design and manufacture
  • Product design
  • Custom material compounding
  • Custom silicone calendering
  • Custom silicone extrusion
  • Silicone hose fabrication
  • Complete material and finished goods testing and validation
  • Custom private label branding
  • Full-time in-house quality inspection
  • "Just In Time" delivery and logistics

Get in touch with us to explore your needs today!

Order Online Today